Protective Shelf - Miele KM 520 Operating And Installation Instructions

Protective shelf

After installing the hob, you need to
make sure that the underside of the
appliance cannot be accessed or
touched.
A panel and a protective shelf must be
fitted if:
– there is no oven underneath the
appliance
– the appliance is wider than the oven
– the appliance and the oven are offset
from one another.
A minimum distance of 75 mm is
required between the upper surface of
the worktop and the protective shelf.
A gap of 10 mm must be maintained
between the shelf and the rear wall.
Installation
39