Protective Shelf - Miele KM 6012 Operating And Installation Instructions

After installing the hob, you need to
make sure that the underside of the
appliance cannot be accessed or
touched.
A fascia panel and a protective shelf
must be fitted if:
– the appliance is wider than the
oven/cooker/control unit.
– the appliance and the built-under
oven/cooker/control unit are offset
from one another.
A minimum distance of 55 mm is
required between the upper surface of
the worktop and the protective shelf.
A gap of 10 mm must be maintained
between the shelf and the rear wall.

Protective shelf

33