Jet Cool Operation - NEC RSH2423S Owner's Manual

(1) A30045A(w fl+) 1994.10.12 12:36 PM '. 3 3 14

Jet Cool Operation

NOTE:
During the JET COOL function at any moment, the A/C starts to blow the cool air at extremely
high speed for 30 minutes setting the room temp. automatically to 18°C. It is especially used
to cool the room temp. in the shortest time in a hot summer.
In heat pump mode or neuro fuzzy mode however, the JET COOL function is not available.
In order to return to the normal cooling mode from the JET COOL mode, you just press either
the operation mode selection button, airflow volume selection or temp. setting button or the
JET COOL button again.
Press the Start/Stop button. The unit will respond with a beep.
1
Press the Jet Cool button to operate the speed cooling mode
2
and the unit will operate in super high fan speed on cooling
mode for 30 minutes.
To cancel the Jet Cool mode, press the Jet Cool button
3
again or the fan speed button or the room temperature setting
button and the unit will operate in high fan speed on cooling
mode.
14
or or