Operation Instructions; Operation Modes - NEC RIH-6867 User Manual

Operation instructions

Operation modes

Each time MODE
is changed in sequence:
COOLING
Heating mode is NOT available for cooling only air conditioner.
Each time the "FAN" button is pressed, the fan speed is
changed in sequence:
Auto
At "FAN ONLY" mode, only "High","Medium" and "Low" are available.
At "DRY" mode, airflow is set at "Low" automatically, "FAN" button
is ineffective in this case.
Press once to
Press once to
*Note: Heating mode is NOT available for cooling only models.
Press
signal, the RUN indicator of the indoor unit lights up.
SWING, SMART, TIMER, SLEEP and SUPER operation modes will be specified in the following pages.
Changing modes during operation, sometimes the unit does not response at once. Wait 3 minutes.
During heating operation, air flow is not discharged at the beginning. After 2 5 minutes, the air flow will be discharged
until temperature of indoor heat exchanger rises.
Wait 3 minutes before restarting the appliance.
PDF created with pdfFactory Pro trial version
Selecting mode
button is pressed, the operation mode
DRY FAN ONLY
FAN mode
High Medium
Setting temperature
raise temperature setting by 1
lower temperature setting by 1
Range of available set temperature
*HEATING, COOLING 18 ~32
room temperature
DRY
unable to set
ONLY
FAN
Turning on
button, when the appliance receives the
HEATING
Low
℃
℃
+ -
2
7
www.pdffactory.com
SUPER
SMART
3
2
SLEEP
－
1
4