Getting Started; Unpacking And Mounting Cintel - Blackmagicdesign cintel Installation And Operation Manual

Getting Started

Unpacking and Mounting Cintel

Blackmagic Cintel's architecturally inspired design allows
it to serve as an aesthetic feature in your studio, but it is
also a large, heavy professional tool. As such, care should
be taken when unpacking and mounting your Cintel unit.
Once you have opened Blackmagic Cintel's road case, you
will see that spaces have been cut in the foam padding to
give you a sturdy grip on your scanner.
Please note that Cintel weighs over 130 pounds and is too
heavy to be unpacked by one person. Unpacking should
be undertaken by 2 people using correct lifting techniques.
2
2
3
3
1. Core clamp 2. Roller 3. Particle transfer roller 4. Left options interface 5. Tensioner sprocket wheel
6. Skid plate 7. Light source 8. Drive sprocket wheel 9. Pin registration expansion port
10. Right options interface 11. Compliance arm 12. Spooler backplate 13. Focus wheel
1
1
4
4
5
5
4
Bend your knees, keep a straight back and lift with careful,
controlled movements.
Once you have gently removed your scanner from its road
case, place it upright on a flat surface capable of supporting
its weight and follow the getting started procedure in the
'getting started with Blackmagic Cintel' section.
Blackmagic Cintel's wall mounts conform to industry
standard television mounting hardware and any television
mount rated higher than 130 pounds will allow you to mount
your scanner securely to your studio wall.
13
13
9
9
6
6
8
8
7
7
12
12
11
11
10
10