Fanimation. 7. Fanimation reserves the right to modify or discontinue any product at any time and may substitute any part under this warranty. 8. Under no circumstances may a fan be returned without prior authorization from Fanimation. The receipt of purchase must ac- company authorized returns and must be sent freight prepaid to Fanimation.
– Bag Assembly Safety Cable Fanimation. Substitution of parts or accessories not designated for use with this product by Fanimation could result in personal injury or property damage. Contact your retail store for missing or damaged parts.
8 - 9 feet above the floor for optimal airflow. Consult your down into the occupied space.Remember to adjust your Fanimation Retailer for optional mounting accessories. thermostat when using your ceiling fan - additional energy and dollar savings could be realized with this simple step! Turn Off When Not in the Room Ceiling fans cool people, not rooms.
Electrical and Structural Requirements (Continued) Deep box with brace (Figure 3) Paired with a deep box, this hanger is meant to span CEILING JOIST between two joists and takes the place of wooden blocking. WARNING To reduce the risk of fire, electrical shock, or personal injury, mount fan to outlet box marked acceptable for fan support of 15.88 kg (35 lbs) or less.
How to Hang Your Ceiling Fan WARNING To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before hanging. (Figure 1) MAIN FUSE BOX NOTE: If you are not sure if the outlet box is grounded, contact a licensed electrician for advice, as it must be grounded for safe operation.
How to Wire Your Ceiling Fan If you feel that you do not have enough electrical wiring NOTE: If fan or supply wires are different colors than indicated, knowledge or experience, have your fan installed by a licensed electrician. IMPORTANT: YOU MUST SET YOUR CEILING FAN TO HIGH SPEED ▲WARNING AND LIGHT KIT (IF ANY) TO THE ON POSITION BEFORE OPERATING...
Installing the Canopy Housing NOTE: This step is applicable after the neccessary wiring is completed. 1. Remove one of the two shoulder screws in the hanger bracket. Loosen the second shoulder screw without fully removing it. Assemble canopy by rotating key slot in canopy over shoulder screw in Ceiling Canopy hanger bracket.
How to Operate Your Ceiling Fan 1. Operating & Using Wall Control: (Figure 1) NOTE: Set pull chain to high speed before using wall control. You can now use your speed control to select any of the 3-speeds plus OFF. •...
Parts List Model #FP6717** Ref. # Description Part # Hanger Bracket Assembly with Screws AP255BL Motor Assembly AMA6717** ADR1-6** Ball Downrod Assembly Canopy PG146** Canopy Screw Cover Assembly AP260** AP6717** Motor Housing Assembly Blade Set AP671704** Wall Control CW1WH Hardware Bag Containing: Allen Wrench 3/32˝...
4. Hanger bracket and/or ceiling outlet box is not 4. Tighten the hanger bracket screws to the outlet box, securely fastened. and secure outlet box. 4. NOT ENOUGH AIR 1. If possible, consider using a longer downrod. MOVEMENT (not included, you can buy the longer downrod from fanimation.com).