Crosley CRD2121NW Use & Care Manual page 8

Looking Inside
Fresh Food Compartment
E
Shelves (style may vary)
CAUTION
To avoid personal injury or property damage :
• Never attempt to adjust a shelf when it is loaded with food.
• Confirm that shelf is secure prior to loading items onto it.
• Handle glass shelves with care. Shelves may break suddenly
if nicked, scratched or exposed to sudden temperature
changes.
Select models are equipped with wire or glass full width
shelves that are supported by rails molded into the interior
walls of the fresh food compartment.
These shelves can easily be adjusted to alternate positions
within the compartment.
To Adjust a Full Width Shelf :
• Grasp each side of the shelf.
• Pull the shelf forward approximately 1".
• While supporting the
shelf from underneath,
lift it up and out.
• Slide the shelf into the
desired alternate position.
Shelves in other models hook into support rails located
on the back wall of the fresh food compartment.
To Remove :
• Slightly tilt up the front
and lift up the rear of
the shelf, then pull the
shelf straight out.
To Lock Into Another Position :
• Tilt up the front edge of the shelf.
• Insert the hooks into the desired frame openings and let the
shelf settle into place.
• Be sure the shelf is securely locked at the rear.
• On certain models the outside edge of the shelf rests on rails
formed into the side of the fresh food compartment.
7
The bucket-style Door Shelves accommodate a variety of
container sizes and shapes.
To Remove :
• Grasp the shelf on each end.
• Lift the shelf up and out.
To Reinstall :
• While holding the shelf on each end, slide the shelf in and down.
• Push down on the interior center of the shelf to snap it
completely into place.
The Crispers provide a storage area for fruit and vegetables.
Some crisper drawers have slide humidity controls.
FRUIT
For fruit storage, slide the control (select models) to the left to
provide lower humidity conditions in the drawer.
For vegetable storage, slide the control (select models) to the
right to provide higher humidity conditions in the drawer.
For best results, keep the crispers tightly closed.
To Remove :
• Pull out the crisper until it stops.
• Tilt the drawer up slightly and pull it out.
To Reinstall :
• With the drawer tilted up slightly, align the drawer in the
tracks and slide in.
The Crisper Top serves as the lower refrigerator shelf.
To Remove :
• Remove the crisper drawers.
• Slightly lift up the front of the shelf.
• Support the shelf from underneath to lift it up and then out of
the cabinet.
To Reinstall :
• With the shelf front tilted slightly upward, carefully insert the
crisper top back into the cabinet.
• Position the rear and sides of the shelf on the supports and
let the crisper top settle into place.
VEGETABLES
E