C Operation - IVT 12PHR-N Operation Manual

TIMER ON
1 Press the TIMER ON (
2 The TIMER ON indicator will blink;
press the TIME ADVANCE or REVERSE
button to set the desired time .
(The time can be set in 10-minute increments.)
3 Press the TIMER SET (SET/C) button.
• The orange TIMER lamp (
light.
Select the operation condition.
4
NOTE:
• The unit will turn on prior to the set time to allow
the room to reach the desired temperature by the
programmed time. (Awaking function)
TO CANCEL TIMER MODE
) button. Press the TIMER CANCEL (SET/C) button.
• The orange TIMER lamp (
• The current clock time will be displayed on the remote
) on the unit will
NOTE:
• If any TIMER ON, TIMER OFF and ONE-HOUR OFF
TO CHANGE TIME SETTING
&DQFHO WKH 7,0(5 VHWWLQJ ¿UVW WKHQ VHW LW DJDLQ
COMBINED USE OF ON AND OFF TIMERS
You can use the ON and OFF timers in
combination.
Example:
To stop operation at 11:00 p.m. and resume operation
to bring the room temperature to the desired level by
7:00 a.m.
1
1
2
2
3
NOTE:
• You cannot programmed the ON-TIMER and OFF-
• Either timer can be programmed to activate prior the
GB-11
off.
control.
TIMER are set, the TIMER CANCEL button cancels
all settings.
Set the TIMER OFF to 11:00 p.m. during
operation.
Set the TIMER ON to 7:00 a.m.
The arrow ( or
indicator and the TIMER OFF indicator shows
ZKLFK WLPHU ZLOO DFWLYDWH ¿UVW
TIMER to operate the unit at different temperatures
or other settings.
other.
) on the unit will turn
CANCEL
) between the TIMER ON