Basic Operation - IVT AY-XP12DR-NC Operation Manual

BASIC OPERATION

DISPLAY
MODE 1h
CLEAN
FAN
SWING
SET/C
TIPS ABOUT AUTO MODE
In the AUTO mode, the temperature setting and mode are automatically selected according to
the room temperature and outdoor temperature when the unit is turned on.
Modes and Temperature Settings
During operation, if the outdoor temperature
changes, the temperature settings will auto-
matically slide as shown in the chart.
Press the MODE button to select the op-
1
eration mode.
Press the ON/OFF button to start opera-
2
tion.
• The red OPERATION lamp (
will light.
2
Press the THERMO. button to set the de-
3
5
sired temperature.
• In the AUTO and
DRY mode, the tem-
3
perature
changed in 1°C incre-
ments within the
1
range of 2°C higher
to 2°C lower from the
temperature auto-
matically determined
by the air conditioner.
4
• In the COOL and
HEAT modes, the
temperature can be
set within the range
of 18 to 32°C
Press the FAN button to set the desired fan
4
speed.
• In the DRY mode, the fan speed is preset to
AUTO and cannot be changed.
To turn off the unit, press the ON/OFF but-
5
ton again.
• The red OPERATION lamp (
will turn off.
indoor temp.
(¡C)
E-8
AUTO HEAT COOL
(Example: 1°C higher)
can be
(Example: 2°C lower)
AUTO SOFT LOW
0 10 18 8
Cool
( 4¡C)
9
Heat Heat Dry
( )
( 4¡C) ( 3¡C)
Room Temp.
- ¡C
1
Heat
( ¡C)
the figures in ( ) are temperature settings
DRY
) on the unit
C
C
HIGH
) on the unit
outdoor
34 (¡C)
temp.
Cool Cool
( 5¡C) ( 6¡C)