Adjust Levels, Video Sources - Clarity SN-4610-1080 User Manual

3.3 Manual Selection and Adjustments

3.3.3 Adjust Levels, Video Sources

Video sources are adjusted best if a color bar test pattern is available from the video source: the DVD or
VCR player. If not, you will have to adjust by eye and the "feel" of the picture.
Adjusting with color bars
1. If possible, use a color bar pattern from the video
source you will use for the program material. You
cannot use the color bar from the Test Patterns
menu.
2. In the Picture menu, check Blue Only. You should
see only the alternate color bars, all of them blue.
3. Adjust Saturation to make the outer two color
bars match. Match them in brightness; they will
already match in color.
4. Adjust Hue to make the inner two color bars
match.
5. Uncheck Blue Only
When a video source is selected, Auto Setup Options is
not available. Adjustments must be made manually.
6. If the color bar pattern has a pluge, you can use it
to adjust Brightness.
Adjust Brightness so you cannot
see the different between these
two marks,
but you can see the difference
between these two marks.
Adjusting with any picture
This procedure must be done after you adjust color
balance (page 46).
38
Pluge
1. Choose pictures that have blacks and whites rep-
resented as well as a variety of colors.
2. Adjust Contrast, Brightness, Saturation and Hue
on one Bay Cat until it looks satisfactory.
3. Adjust all the other Bay Cats in the wall so they
have the same values for Contrast, Brightness,
Saturation and Hue as the first Bay Cat.