Installation Instructions - PlasmaMade GUC 1214 Installation And User Manual

8. Installation instructions

The PlasmaMade® Airfilter may be used on almost all existing and new-installation
extractor hood units. The extractor hood must fulfil the following points:
• Extractor hood must be suitable for recirculation (the duct must feature
openings through which the filtered air can be returned back into the
room). We do not recommend these openings to be directed at the wall or
ceiling. Provide a gap of at least 500 mm in between.
• Top of motor housing to top of duct must be at least 400 mm.
• We recommend respecting a minimum distance from hob to bottom of
extractor unit (due to the heat production from the hob) of:
Induction/ceramic
Gas hob
Gas wok, 3.2 - > 6 kW
• A mains socket within a suitable distance (220 V, no earth needed).
Note: If the extractor unit is mounted at a smaller distance above the hob, the
PlasmaMade® Airfilter's guarantee is invalidated.
> 65 cm
> 70 cm
> 75 cm
10