Safety Precautions - FUNAI F42PDME Service Manual

PDP Module is a display device to be divided into a Panel part and a Drive part. The Panel part consists of Elec-
trodes, Phosphor, various dielectrics and gas, and the Drive part includes electronic circuitry and PCB.
When using/handling this PDP Module, pay attention to the below warning and cautions.
Warning!
Indicates a hazard that may lead to death or injury if the warning is ignored and the product is handled incorrectly.
Caution!
Indicates a hazard that can lead to injury or damage to property if the caution is ignored and the product is han-
dled incorrectly.
1. WARNING
(1) Do not supply a voltage higher than that specified to this product. This may damage the product and may
cause a fire.
(2) Do not use this product in locations where the humidity is extremely high, where it may be splashed with wa-
ter, or where flammable materials surround it.
Do not install or use the product in a location that does no satisfy the specified environmental conditions. This
may damage the product and may cause a fire.
(3) If a foreign substance (such as water, metal, or liquid) gets inside the product, immediately turn off the power.
Continuing to use the product, it is may cause fire or electric shock.
(4) If the product emits smoke, and abnormal smell, or makes an abnormal sound, immediately turn off the power.
Continuing to use the product, it may cause fire or electric shock.
(5) Do not disconnect or connect the connector while power to the product is on. It takes some time for the voltage
to drop to a sufficiently low level after the power has been turned off.
Confirm that the voltage has dropped to a safe level before disconnecting or connecting the connector.
(6) Do not pull out or insert the power cable from/to an outlet with wet hands. It may cause electric shock.
(7) Do not damage or modify the power cable. It may cause fire or electric shock.
(8) If the power cable is damaged, or if the connector is loose, do not use the product: otherwise, this can lead
to fire or electric shock.
(9) If the power connector or the connector of the power cable becomes dirty or dusty, wipe it with a dry cloth.
Otherwise, this can lead to fire.
(10) PDP Module uses a high voltage (Max.450V dc). Keep the cautions concerning electric shock and do not
touch the Device circuitry when handling the PDP Unit. And because the capacitor of the Device circuitry may
remain charged at the moment of Power OFF, standing by for 1 minute is required in order to touch the Device
circuitry.
2. CAUTIONS
(1) Do not place this product in a location that is subject to heavy vibration, or on an unstable surface such as an
inclined surface. The product may fall off or fall over, causing injuries.
(2) Before disconnecting cable from the product, be sure to turn off the power. Be sure to hold the connector when
disconnecting cables. Pulling a cable with excessive force may cause the core of the cable to be exposed or
break the cable, and this can lead to fire or electric shock.
(3) This product should be moved by two or more persons. If one person attempts to carry this product alone, he/
she may be injured.
(4) This product contains glass. The glass may break, causing injuries, if shock, vibration, heat, or distortion is
applied to the product.

SAFETY PRECAUTIONS

2-1-1 L0604SC