Specifications - FUNAI F42PDME Service Manual

Description
Screen Size
Pixel Resolution
Output Colors
Screen Aspect Ratio
Contrast Ratio
Brightness
Comb Filter Type
Available Input Format
Sound Output
Speaker
Audio IN
Component AV Input (1)
Component AV Input (2)
Composite AV Input (1)
S-Video (1)
Composite AV Input (2)
S-Video (2)
Analog Audio output
Power In
Power Consumption
Operation Temperature
Humidity
Dimension
Weight
Note:
Nominal specifications represent the design specifications. All units should be able to approximate these. Some
will exceed and some may drop slightly below these specifications. Limit specifications represent the absolute
worst condition that still might be considered acceptable. In no case should a unit fail to meet limit specifications.

SPECIFICATIONS

Display Features
920.1 (W) x 518.4 (H) mm, 42 in. Wide VGA panel
852 (H) x 480 (V)
16.7 million
16:9
1000:1
2
470 cd/m (PEAK)
3-Dimensional Y/C Separation
720p/1080i/480p/480i (720p/1080i/480p: Component 2 only)
Audio Features
5W + 5W, 10% THD
3 in Round Type x 4
0.5Vrms
Connectors
SD component video/Y, Cb, Cr, (RCA x 3) - rear
audio L/R (RCA x 2) - rear
Y: 1.0Vp-p (75 Ohm), Cb/Cr: 0.7Vp-p (75 Ohm)
HD component video/Y, Pb, Pr, (RCA x 3) - rear
audio L/R (RCA x 2) - rear
Y: 1.0Vp-p (75 Ohm), Pb/Pr: 0.7Vp-p (75 Ohm)
Composite video (RCA x 1) - rear, 1.0Vp-p (75 Ohm)
S-Video (4 pin DIN) - rear
audio L/R (RCA x 2) - rear
Y: 1.0Vp-p (75 Ohm), C: 0.286Vp-p (75 Ohm)
Composite video (RCA x 1) - rear, 1.0Vp-p (75 Ohm)
S-Video (4 pin DIN) - rear
audio L/R (RCA x 2) - rear
Y: 1.0Vp-p (75 Ohm), C: 0.286Vp-p (75 Ohm)
audio L/R (RCA x 2) - rear
General
120V ±10%, 60Hz/AC
350 W (standby-condition 1.3W)
41F - 104F (5°C - 40°C)
Under 80%
1314 (W) x 692 (H) x 149.5 (D) mm
1314 (W) x 789 (H) x 393 (D) mm (Incl. Stand)
112.46 lbs (51 kg)
1-1-1
Condition
L0605SP