Shark NV360NZ Owner's Manual page 21

4
Hose and Connections to Vacuum
• D etach the stretch hose from the back of the
detachable canister by squeezing the tabs
together and pulling up. (Fig. 34) Straighten out
the hose and look inside for blockages.
• R emove the dust cup and extension wand and
separate the portable Lift-Away
the motorised floor nozzle. Look in all 4 openings
for any blockages. (Fig. 35)
Fig. 34
Fig. 35
canister from
™
5
Motorised Floor Nozzle
• D etach the hose on the motorised floor nozzle
at the top by squeezing the tabs together and
pulling out, and at the bottom by pulling out the
connector. Inspect inside the 3 holes. (Fig. 36)
CUSTOMER CARE - AU: 1800 890 840
Fig. 36
20