Step 4: Setting The Clock; Step 5: Setting The Language To Be Used In The Display Window; Turning The Power Off - Sony ICD-SX713 Quick Start Manual

Turning the power off

Slide the POWER/HOLD switch in the direction
of "POWER" for more than 2 seconds, and the
"Power Off" animation is displayed.

Step 4: Setting the Clock

You need to set the clock to use the alarm
function or record the date and time.
When you insert batteries for the first time, or
when you insert batteries after the IC recorder has
been without batteries for more than 1 day, the
"Set Date&Time" animation appears, and then the
year section begins to flash in the clock setting
display window.
Setting the clock after
recharging the batteries
1
Press v or V on the control button to set the
year, month, day, hour, and minute in sequence,
and then press /ENT.
N
x STOP
N /ENT
v , V
Select the last two digits of the year when you
set the year.
2
Press STOP to return to the stop mode
x
display.
Setting the clock using the
menu
Refer to "Setting the clock using the menu"
(page 16 in "Operating Instructions").
Step 5: Setting the
Language to Be Used in
the Display Window
You can select the language to be used for
messages, menus, folder names, file names, etc.
from 11 languages.
x STOP
N /ENT
v , V
5
GB