Lcd Monitor Display/Switching The Lcd Monitor Display - Panasonic DMC-FX12 Operating Instructions Manual

LCD Monitor Display/
Switching the LCD
Monitor Display
∫ Screen display in normal picture
mode [ ] (Initial settings)
1 2
13
1 Recording mode
2 Flash mode (P35)
• If you press the shutter button halfway
when the flash is activated, the flash
icon turns red.
3 AF area (P22)
• The AF area displayed is bigger than usual
when taking pictures in dark places.
4 Focus (P22)
5 Picture size (P61)
6 Quality (P61)
: Jitter alert (P24)
7 Battery indication
• The indication turns red and blinks if the
remaining battery power is exhausted.
(The status indicator blinks when the LCD
monitor turns off.) Recharge the battery or
replace it with a fully charged battery.
• It does not appear when you use the
camera with the AC adaptor
(DMW-AC5E; optional) connected.
8 Number of recordable pictures (P99)
9 Recording state
10 Built-in memory/Card
3 4 5 6 7
8
8
9
10
F2.8 1/30
12 11
• The access indication lights red when
pictures are being recorded on the
built-in memory (or the card).
– When using the built-in memory
– When using the card
• Do not do the following when the
access indication lamps lights. The
card or the data on the card may be
damaged and this unit may no
longer operate normally.
– Turn this unit off.
– Remove the battery or the card
(when using a card).
– Shake or bump this unit.
– Disconnect the AC adaptor.
(DMW-AC5E; optional) (when
using the AC adaptor)
• Do not do the above when pictures are being
read or deleted or the built-in memory (or the
card) is being formatted (P80).
• The access time for the built-in memory
may be longer than the access time for a
card. (Max. about 7 sec.)
11 Shutter speed (P22)
12 Aperture value (P22)
• If the exposure is not adequate, the
aperture value and the shutter speed
turn red. (They do not turn red when
the flash is activated.)
13 Optical Image Stabilizer (P41)
• Refer to P88 for information about other
screen displays.
∫ Switching the screen display
You can change the screen display by pressing
[DISPLAY]. This allows you to display
information while taking pictures such as the
picture size or the number of recordable pictures
or take pictures without displaying any
information. Refer to P32 for details.
Preparation
21
VQT1C27