Charging Time And Recordable Time; Selecting A Mode (Turning The Camera On/Off) - Panasonic NV-GS90 Operating Instructions Manual

Charging time and recordable time

The times shown in the tables below are for when
the temperature is 25 oC and the humidity is 60%.
If the temperature is higher or lower than 25 oC,
the charging time will become longer.
A
Supplied
battery B
(7.2 V/
640 mAh)
C
VW-VBG130 A
(7.2 V/
B
1320 mAh)
C
VW-VBG260 A
(7.2 V/ B
2640 mAh)
C
VW-VBG6 A
(7.2 V/
B
5800 mAh)
C
A Charging time
B Maximum continuously recordable time
C Actual recordable time
(The actual recordable time refers to the
recordable time on a tape when repeatedly
starting/stopping recording, turning the unit on/off,
moving the zoom lever, etc.)
"1 h 40 min" indicates 1 hour 40 minutes.
≥The charging time and recordable time shown in
the table are approximations. The times indicate
the recordable times when the viewfinder is
used. The times in parentheses indicate the
recordable times when the LCD monitor is used.
≥We recommend the Battery Pack VW-VBG130,
VW-VBG260 and VW-VBG6 for long time
recording (2 hours or more for continuous
recording, 1 hour or more for actual recording).
Before using
1 h 40 min
1 h 45 min
(1 h 30 min)
55 min
(45 min)
2 h 35 min
3 h
(2 h 40 min)
1 h 35 min
(1 h 20 min)
4 h 40 min
6 h 5 min
(5 h 20 min)
3 h 10 min
(2 h 45 min)
9 h 25 min
14 h 5 min
(12 h 15 min)
7 h 25 min
(6 h 25 min)
≥The actual time may become shorter than this.
The recordable time shown in the table are
approximations. The recordable time will
become shorter in the following cases:
≥When you use both the viewfinder and the
LCD monitor simultaneously while rotating
the LCD monitor frontward to record yourself
etc.
≥The batteries heat up after use or charging. The
main unit of the movie camera being used will
also heat up. This is normal.
≥Along with the reduction of the battery capacity,
the display will change:
# #
discharges, then
Selecting a mode
(Turning the camera on/off)
When recording, open the lens cover before
turning the unit on. (
-7-
the lens cover closed, the automatic white
balance adjustment (
properly.
Rotate the mode dial to select the desired mode
or OFF.
≥Rotate the mode dial slowly.
ª
How to turn on the power
1
While pressing the lock release button, set
the mode dial to select the desired mode
≥Rotate the mode dial while at the same time
pressing in the lock release button A if
changing from OFF to another mode.
≥Align with the mark B.
≥The status indicator lights red and the power
turns on.
#
. If the battery
( ) will flash.
) If the unit is turned on with
) may not function
-49-
A
B
#
9
LSQT1290