Power Supply; Connecting The Video Cable - Abus TVHD60000 User Manual

6.4 Power supply

Before starting installation, ensure that the power supply system voltage and the rated voltage of
the camera are identical.
TVHD60000
The cameras require a 12 V DC power supply. Ensure correct polarity when connecting them.
A plug-in power supply unit (DC connector, 5.5 mm x 2.1 mm) is provided for the connection.

6.5 Connecting the video cable

In order to transmit the video signal from the HD-SDI camera to an HD-SDI converter, monitor or
recorder, an RG6 or RG59 coaxial cable with a BNC plug (male) must be connected to the video
output. The cable length to the next device may not exceed 80 meters (RG59) or 150 meters (RG6).
To increase the range, you can install suitable signal HD-SDI repeaters.
1
(1) Video signal output (HD-SDI)
2
(2) Power supply, 12 V DC
28