Switching-On - Digittrade HS128 User Manual

Switching-On

The DIGITTRADE HIGH SECURITY HDD is powered by the USB or FireWire
bus. It is not neccessary to use an additional power supply. In case your
used connecter cannot provide enough power it is possible to use an
additional power supply.
If the HS128/256 is connected correctly to the computer the LED
"ACTIVE", "STATUS" and "ERROR" flash once.
The hard disk is now ready for use, but still needs to get unlocked. For this
you need one of the provided Smart Cards and the PIN.
This hard drive is protected by the two-factor authentication to avoid
unauthorized access.
Note: Please use only original accessories in combination with DIGITTRADE
HIGH SECURITY HDD.
9