Pin Entry - Digittrade HS128 User Manual

PIN Entry

After you have activated the DIGITTRADE HIGH SECURITY HDD success-
fully and inserted a valid Smart Card the keypad will be lighted and the
HDD is ready for PIN entry.
Now you can enter the 8-digit PIN.
The preset factory PIN is "1-2-3-4-5-6-7-8", after you entered the PIN,
press the "Enter" button.
Note: To guarantee a maximum security it is obligatory to change the
standard PIN (see page 39). Additionally it is advisable to use different PINs
for the two different Smart Cards.
After successful PIN entry the DIGITTRADE HIGH SECURITY HDD will be
identified by the system as a removable medium and the lighting of the
keypad disappears.
The access is enabled and the Smart Card can be removed.
If a wrong PIN was entered, the "ERROR" LED flashes. Press the "ESC"
button to restart the PIN entry.
Note: After PIN was entered eight times incorrectly, the Smart Card will be
irrevocably locked and cannot be used anymore.
11