Changing The Pin - Digittrade HS128 User Manual

Changing the PIN

Follow these steps to change the PIN of your Smart Card :
1) Insert the Smart Card into DIGITTRADE HIGH SECURITY HDD
(see page 37).
2) Press the "CHANGE PIN" button and afterwards the "1" button.
3) Confirm the entry with "ENTER". The "STATUS" LED will flash four
times.
4) Enter the current 8-digit PIN and press "ENTER" to confirm the entry.
5) Enter the new 8-digit PIN and press again "ENTER" for confirmation .
6) Enter the new confirmed 8-digit PIN again and press "ENTER".
After a successful PIN change, the Status -LED will flash four times and
you will hear two beeps. The DIGITTRADE HIGH SECURITY HDD will be
identified by the system as a removable medium and the lighting of the
keypad disappears.
The access is enabled and the Smart Card can be removed.
If the PIN change was not sucessful, the "ERROR" LED will flash. Press
the "ESC" button and start again with the first step of the PIN change.
Note: The DIGITTRADE HIGH SECURITY HDD only accepts 8-digit PINs.
12