Switching-On; Locking And Unlocking The Hard Drive - Digittrade RS256 User Manual

Switching-On

Move the control lever to "An" (On). The LED status
will turn on green light. The DIGITTRADE RS256 HDD
is already preformatted in the NTFS file system.
Locking and Unlocking the Hard
Drive
To avoid unauthorized access to your sen-
sitive data the DIGITTRADE Security Hard
Drive RS256 is always locked and needs to be
unlocked for use.
Hold one of the two enclosed RFID keys above the
reception symbol of the hard drive.
The hard drive will be unlocked, if you hear a short
acoustic signal and the green LED flashs.
The hard drive will be identified by the system.
If you unplug the hard drive from the system it will
be unlocked again. Your data will immediately be
protected against unauthorized access.
Note: The hard drive also can be locked by holding
the key again over the reception symbol or by turning
it off.
34