Table of Contents
Advertisement
Picture adjustments
DPC (Digital Picture Control) function
This function sets the sharpness automatically
to give the best possible picture during
playback.
To adjust the picture to the desired
sharpness, press the DPC Plus button.
(The DPC Plus mode does not function
in
variable playback modes.)
The condition of the DPC Plus mode is
displayed on-screen for about 3 seconds.
1
DPC
PLUS
ON
I
-
+
n
DPC
PLUS
OFF
Tracking adjustment
This VCR is equipped with an auto tracking
function. During playback this function will
adjust the tracking to the best possible image.
If noise appears in the playback picture, press
the CH~RACK
(+ or -) button, to reduce the
noise interference
in the image.
When the tracking is adjusted using the
CHflRACK
(+ or -) button, the auto tracking
mode is cancelled.
To return to auto tracking mode, eject the
cassette (press the STOPIEJECT
button),
then reload it again.
Noiseinterference
If the CHANNEL
(+ and -) buttons on the
VCR are pressed simultaneously
in the
playback mode, the tracking adjustment will
move to centre position and the auto
tracking mode will be cancelled.
Depending on the cassette tape, you may
find that some noise interference cannot be
completely corrected using the tracking
controls.
If
the still picture
moves up and down
Use the CH~RACK
(+ or -) button, to correct.
3
m
BASIC OPERATION
DPC Plus
CHANNEL ( +, -)
EJECT
IA
nce the cassette tape is
nloaded, the VCR is reset and
]e next time the VCR is used you
lay need to do the corrections
gain.
12
Advertisement
Table of Contents
