Kenwood KMM-BT302 Instruction Manual page 16

BLUETOOTH®
Bluetooth test mode
You can check the connectivity of the supported
profile between the Bluetooth device and the unit.
• Make sure there is no Bluetooth device paired.
1
Press and hold .
"PLEASE PAIR YOUR PHONE PIN 0000" appears.
2
Search and select this unit model name
(KMM-BT30 * ) on the Bluetooth device.
3
Operate the Bluetooth device to confirm
pairing.
"TESTING" flashes on the display.
The connectivity result (OK or NG) appears after
the test.
PAIRING: Pairing status
HF CNT: Hands-Free Profile (HFP) compatibility
AUD CNT: Advanced Audio Distribution Profile
(A2DP) compatibility
PB DL: Phonebook Access profile (PBAP)
compatibility
To cancel test mode, press and hold
off the unit.
16
BLUETOOTH — Audio
Audio player via Bluetooth
1
Press repeatedly to select BT AUDIO (or press SRC on RC-406).
2
Operate the Bluetooth audio player to start playback.
To
Playback / pause
Select group or folder
Reverse / Forward skip
Reverse / Fast-forward
Repeat play
to turn
Random play
Select a file from a
folder/list
Operations and display indications may differ according to their availability on the connected
device.
On the faceplate
Press .
Press J / K.
Press S / T.
Press and hold S / T.
Press repeatedly.
ALL REPEAT, FILE REPEAT, REPEAT OFF
Press and hold to select
ALL RANDOM.
• Press to select RANDOM OFF.
Refer to "Select a file from a
folder/list" on page 9.
On the remote control
Press .
Press / .
Press S /
.
Press and hold S /
.
( Not available )
( Not available )
( Not available )