Table of Contents
Advertisement
GETTING STARTED
AUDIO CONTROL
SWITCH
REAR/ SUB-W: Selects whether rear speakers or a subwoofer are
PREOUT*
connected to the line out terminals on the rear (through an external
amplifier).
DISPLAY
EASY MENU
ON: Both display and button illuminations change to white color when
entering [FUNCTION]. ; OFF: Both display and button illuminations
remain as [COLOR SELECT] color. ( 20)
TUNER SETTING
PRESET TYPE
NORMAL: Memorizes one station for each preset button in each band
(FM1/ FM2/ FM3/ AM/ SW1/ SW2). ; MIX: Memorizes one station for
each preset button, regardless of the selected band.
SYSTEM
KEY BEEP*
ON: Activates the keypress tone. ; OFF: Deactivates.
TDF ALARM*
ON: Activates the alarm if you forget to detach the faceplate when ACC is
set to OFF. ; OFF: Deactivates.
SOURCE SELECT
PANDORA SRC ON: Enables PANDORA in source selection. ; OFF: Disables. ( 10)
BUILT-IN AUX
ON: Enables AUX in source selection. ; OFF: Disables. ( 7)
F/W UPDATE
UPDATE SYSTEM
F/W UP xx.xx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not
activated).
For details on how to update the firmware, see:
www.kenwood.com/cs/ce/
FACTORY RESET YES: Resets the settings to default (except the stored station). ;
NO: Cancels.
Default: XX
CLOCK
CLOCK DISPLAY
ENGLISH
TURKCE
* Not applicable if 3-way crossover is selected.
Change the crossover type
1
Press
2
Press and hold number buttons 4 and 5 to enter crossover select.
The current crossover type appears.
3
Turn the volume knob to select "2WAY" or "3WAY", then press the
knob.
4
Turn the volume knob to select "YES" or "NO", then press the knob.
The selected crossover type appears.
• To cancel, press and hold
• To adjust the selected crossover settings, ( 18).
Caution
Select a crossover type according to how the speakers are connected.
( 26)
If you select a wrong type:
• The speakers may damage.
• The output sound level may be extremely high or low.
ON: The clock time is shown on the display even when the unit is
turned off. ; OFF: Cancels.
Select the display language for [FUNCTION] menu and music
information if applicable.
By default, [ENGLISH] is selected.
repeatedly to enter STANDBY.
.
5
ENGLISH
Hide quick links:
Advertisement
Table of Contents
