Kenwood KMM-BT302 Instruction Manual page 13

BLUETOOTH®
The following operations may differ or not available depending on the connected phone.
To
First incoming call...
Answer a call
Reject a call
End a call
While talking on the first incoming call...
Answer another incoming
call and hold the current
call
Reject another incoming
call
While having two active calls...
End current call and
activate held call
Swap between the
current call and held call
Adjust the phone volume
[00] to [35] (Default: [15])
Switch between hands-free
and private talk modes
On the faceplate
Press or the volume knob
or one of the number buttons
(1 to 6).
.
Press
Press .
Press .
Press .
Press .
Press .
Turn the volume knob during
a call.
• This adjustment will not
affect the volume of the other
sources.
Press during a call.
• Operations may vary
according to the connected
Bluetooth device.
Improve the voice quality
While talking on the phone...
On the remote control
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item (see the
following table), then press the knob.
Press .
3
Repeat step
activated.
4
Press and hold
Press .
To return to the previous setting item, press
Press .
MIC GAIN
Press .
NR LEVEL
Press .
ECHO CANCEL
Press .
Make the settings for receiving a call
Press .
1
Press
2
Turn the volume knob to select an item ( 14), then
press the knob.
3
Repeat step
( Not available )
activated.
4
Press and hold
To return to the previous setting item, press
( Not available )
2
until the desired item is selected or
to exit.
–10 — +10 (–4): The sensitivity of the microphone
increases as the number increased.
–5 — +5 (0): Adjust the noise reduction level
until the least noise is being heard during a phone
conversation.
–5 — +5 (0): Adjust the echo cancellation delay
time until the least echo is being heard during a
phone conversation.
to enter Bluetooth mode.
2
until the desired item is selected or
to exit.
ENGLISH
.
Default: XX
.
13