Start/Pause Button; Function Indicator Lights; Function Buttons - Nordmende WM1201WH User Manual

START/PAUSE BUTTON

Used to start a selected program or pause during running.
WARNING!
The program knob must be brought to O(off) position before
selecting the program or changing an existing program.

FUNCTION INDICATOR LIGHTS

When the start/pause button or any function button is pressed,the
corresponding light turns on.The light turns off when the function
button or start/pause button is re-pressed, or when the process
or selected function is completed.
The function indicator lights are also used in the failure detection system
detailed in section 9.

FUNCTION BUTTONS

Rinse hold
This function is recommended to be used when the clothes cannot
be removed immediately after the end of the program.This will
prevent creasing. When this button is pressed, the last rinsing
water is not drained. For the program to continue after this,
repress the same button.
If you do not want your sensitive clothes to be spun or you
want them to spin gently, turn the program knob to O (off) position.
Turn the program knob to the draining or spinning program you
desire and press the start/pause button. If the program you have
selected is a drain program, your
you have selected a spinning program, your machine will perform a
spinning operation and then end the program.
Easy ironing
By using this function, you clothes will come out
less wrinkled after washing.
Extra rinse
You can have one more rinsing done in addition to the rinses
which your machine has made in all washing programs by using
this function.
machine will drain the water. If
8