Nordmende WM1000WH User Manual
  1. Manuals
  2. Brands
  3. Nordmende Manuals
  4. Washer
  5. WM1000WH
  6. User manual

Nordmende WM1000WH User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

WASHING MACHINE USER MANUAL
WM1000WH
WM1000SL
WM1200WH
WM1200SL

Advertisement

Table of Contents
loading

Related Manuals for Nordmende WM1000WH

Summary of Contents for Nordmende WM1000WH

  • Page 1 WASHING MACHINE USER MANUAL WM1000WH WM1000SL WM1200WH WM1200SL...

  • Page 2: Table Of Contents

    THE CONTENTS SECTION 1:BEFORE USING  Safety warnings  Recommendations SECTION 2:INSTALLATION  Removal of transportation screws  Adjustment of feet  Electrical connection  Water supply connection  Water drain connection SECTION 3:TECHNICAL SPECIFICATIONS SECTION 4:CONTROL PANEL  Start/Pause button ...

  • Page 3: Section 1:Before Using

    SECTION 1:BEFORE USING SAFETY WARNINGS  Do not use a multiple socket or extension cord.  Do not insert a plug with damaged or broken cord into the socket.  If the cord is damaged it should be replaced by the manufacturer or appointed service agent in order to avoid a hazard.

  • Page 4: Section 2:Installation

     If you will not use your machine for a long time, unplug your machine, close the water supply and leave the door open in order to keep the inside of the machine dry and for prevention from unpleasant odour. ...

  • Page 5: Electrical Connection

     You can adjust the balance of your machine from its feet.  First, loosen the plastic adjustment nut.  Adjust by rotating the feet upwards or downwards.  After the balance has been reached, tighten the plastic adjustment nut again by rotating it upwards. ...

  • Page 6: Water Drain Connection

     Water pressure of 1-10 bars from your tap will enable your machine to work more efficiently.(1 bar pressure means water flow of more than 8 liters in 1 minute from a fully opened tap).  After connections are completed, check for the non-leakage of the connection joints by turning on your tap completely.

  • Page 7: Section 3:Technical Specifications

    SECTION 3:TECHNICAL SPECIFICATIONS WM1000WH / WM1200WH / WM1000SL WM1200SL Maximum dry laundry capacity (kg) Recommended loading (kg) Height (cm) Width (cm) 59,6 59,6 Depth (cm) Maximum spin cycle ( rpm ) 1000 1200 (*) Maximum spin cycles depend on the model you’ve chosen...

  • Page 8: Section 4:Control Panel

    SECTION 4:CONTROL PANEL 1-Detergent drawer 6-Program knob 2-Start/pause light 7-Start/pause button 3-Function indicator lights 8-Function buttons 4-Spin speed selector 9-Program end light 5-Program ready light...

  • Page 9: Start/Pause Button

    START/PAUSE BUTTON Used to start a selected program or pause during running. WARNING! It is required for the program knob to be brought to O(off) position before selecting the program or changing a continuing program. FUNCTION INDICATOR LIGHTS When the start/pause button or any function button is pressed,the corresponding light turns on.The light turns off when the function button or start/pause button is re-pressed, or when the process the selected function is completed.
  • Page 10 Extra rinse You can have one more rinsing done in addition to the rinses which your machine has made in all washing programs by using this function. Easy ironing By using this function, you can ensure your clothes to come out less wrinkled after the washing.

  • Page 11: Spin Speed Selector

    WARNING! Functions vary depending on the model you have chosen.If you forgot to use additional function and your machine starts to wash push the additional function button if the indicator light is on. Additional function will be activated.If the indicator light is not on,additional function will not be activated.

  • Page 12: Section 5:Washing Your Laundry

    SECTION 5: WASHING YOUR LAUNDRY  Plug the machine.  Open the tap water. First wash cycle There may be water left inside your machine after factory tests and trials.It is recommended that the first wash cycle should be made without any laundry so that carry out this water;...
  • Page 13  Pull the textiles like trousers,knitted fabric,t-shirt and sweat shirt inside out.  Wash your small clothes like socks and handkerchiefs in a washing bag. Wash up tol 90 ˚C Wash up to 60 ˚C Wash up to 30 ˚C Not washable in washing machine Placement of the clothes into the machine...

  • Page 14: Running The Machine

     You can use fluid detergents in all programs without pre-washing. For this, mount the fluid detergent level plate in the second compartment of the detergent drawer and arrange the amount of fluid detergent according to the levels on this plate. RUNNING THE MACHINE Program selection and features Select the program and additional functions appropriate for your clothes from...

  • Page 15: Section 6:Maintenance And Cleaning

     The door will be unlocked in approximately two minutes after the program ends.You can open the door by pulling the handle of the door towards yourself and take out your clothes.  After you unload your clothes leave the door open to dry the interior of your machine.
  • Page 16 MAX DRY LOAD CAPACITY DETERGENT (kg) PROGRAM TYPE OF LAUNDRY EXPLANATIONS COMPART. WM1000WH / WM1200WH / WM1000SL WM1200SL Dirty, boil, cotton and linen 1-COTTON 90˚ textile 2-COTTON 60˚ Very dirty, cotton, coloured and (PREWASH) linen textile Dirty, cotton, coloured and linen 3-COTTON 60˚...
  • Page 17 MAX DRY LOAD CAPACITY (kg) DETERGENT PROGRAM TYPE OF LAUNDRY EXPLANATIONS WM1000WH / WM1200WH / COMPART. WM1000SL WM1200SL 13-SPORT All spore clothes and Sport clothes CLOTHES jeans Slightly dirty, synthetic or synthetic mixture 14-SYNTHETIC sensitive laundry.Washed Nylon socks, blouse COLD without heating the tap water.

  • Page 18: Pump Filter

     Remove the water inlet hose.  Remove the filters found on the water inlet valves by using a pincer and wash thoroughly with a brush.  Clean the filters of the water inlet hoses located on the tap side by removing manually together with the seal.

  • Page 19: Detergent Drawer

    WARNING! Danger of being scalded! Since the water inside the pump maybe hot, wait for it to cool. DETERGENT DRAWER Detergents may form a sediment in your detergent drawer or in housing of the detergent drawer in time. To clean the sediment, pull out the detergent drawer from time to time.To pull out the detergentdrawer: ...

  • Page 20: Siphon Plug

    SIPHON PLUG Pull out the detrgent drawer. Remove the siphon plug and clean the residues of the softener thoroughly. Fit the cleaned siphon plug in its location. Check if it placed properly. THE CABINET Clean the exterior surface of the cabinet of your machine with lukewarm water and a cleaning substance that will not irritate the cabinet.

  • Page 21: Section 7:Practical Information

    SECTION 7:PRACTICAL INFORMATION Alcoholic beverages: The stain point, should first be washed with cold water, than should be wiped with glycerine and water and be rinsed with water mixed with vinegar. Shoe Polish: The stain should be slightly scratched without ruining the cloth, rubbed with detergent and rinsed.

  • Page 22: Section 8:Avoiding Minor Faults

    Mould: Mould stains should be cleaned as soon as possible. The stain should be washed with detergent, and if it does not disappear, it should be wiped with oxygenated water (in proportion of 3%). Ink: Hold the stained area under cold water and wait until the inky water completely runs off.
  • Page 23 METHODS OF FAILURE PROBABLE CAUSE ELIMINATION Insert the plug into the It is unplugged. socket. Your fuse is defected. Change your fuse. The electric power is Check the electric off. power. Start/pause button has Press the start/pause Your machine does not not been pressed.
  • Page 24 METHODS OF FAILURE PROBABLE CAUSE ELIMINATION There is a small It does not prevent amount of clothes in operation of the the device. machine. Do not exceed the Excessive amount of recommended quantity clothes are filled in the Your machine is of clothes and spread machine or the clothes vibrating.
  • Page 25 METHODS OF FAILURE PROBABLE CAUSE ELIMINATION Clothes exceeding the Put the clothes in your maximum capacity machine in a manner has been filled in your not to exceed its machine. maximum capacity. Use the amount of The washing result is Your water may be detergent according to not good.

  • Page 26: Section 9:Automatic Failure Detection System

    METHODS OF FAILURE PROBABLE CAUSE ELIMINATION The unbalanced load control system will try to distribute your clothes in a homogenous manner. No failure. The The spining process is After your clothes are unbalanced load not done or starts with distributed, passage to control may works in delay .
  • Page 27 FAILURE FAILURE PROBABLE THE PROCESS CODE INDICATOR FAILURE TO BE DONE Turn on the tap to the end.Water may be cut, check it.If the problem is still The water level continuing,your in your machine machine will The program is below heater. automatically Err 02 ready light...
  • Page 28 FAILURE FAILURE PROBABLE THE PROCESS CODE INDICATOR FAILURE TO BE DONE Shut down your The heater of your machine and The start/pause machine or the unplug. Turn off Err 05 light and program heat sensor has your tap and apply end light blink.

  • Page 29: Section 10:International Washing Signs

    SECTION 10: INTERNATIONAL WASHING SIGNS Washing Do not wash Lukewarm iron. Medium hot iron. temparature. (hand wash) Do not tumble Hot iron. Do not iron. Hang to dry. dry. Drip dry. Dry flat. Do not bleach. Handy to bleach. All of these are dry cleaning symbols. The letters are to instruct the cleaner what type of solvent to be used.

This manual is also suitable for:

Wm1000slWm1200whWm1200sl

Table of Contents