Advertisement
Getting Started
When assembling your steam mop there may be a little
water in or around the water tank. This is because we
test all our steam mops 100% before you buy them,
so you get a quality Shark
®
Slim Professional Steam
Pocket
Mop.
®
a
c
e
d
f
a Steam Mop Body
b Mop Handle
c All-Purpose Mop Head
(1024SOY)
d Cleaning Pocket for the All-Purpose Mop Head (x2)
(P119W)
e Water Flask
(1039SO)
f (1) 6mm x 52mm Large Screw*
* Phillips or flat head screwdriver can be used.
Screwdriver not included.
2
g
h
b
i
j
g Quick Release Swivel Cord Wrap
h Cord Clip
i Water Tank
j Steam Control Button
k Mop Head Release Button
k
IMPORTANT: Always make sure the mop is
UNPLUGGED from the wall when not in use. Never
fill the mop, attach the mop head, change or remove
the cleaning pocket when the mop is plugged into
the wall. To prolong the life of your Shark
Professional Steam Pocket
using distilled water. Make sure you only add water
to the tank. Chemicals or cleaning solution may
damage the appliance and could be unsafe for you
and your family.
fig. 1
ASSEMBLE
1
Insert the Mop handle end labeled "Front" into the
steam mop body. Make sure it is inserted past the
line printed on the pole. Secure the assembled
Slim
®
handle and pole by using the large screw and a
®
Mop, we recommend
Phillips or a flat head screwdriver (screwdriver not
included). (fig. 1)
3
Advertisement
