Miele DA 1050-55 Operating And Installation Instructions page 31

 Remove the lamps:
– Loosen the halogen lamp's securing
screw a little.
– Slide the screw and the lamp
downwards.
– Then tighten the screw again.
– Turn the lamp anti-clockwise and pull
it out.
 Hang the rangehood on the brackets.
 Tighten the screws at the back of the
rangehood on the left and right. This
will adjust the pitch of the rangehood
and secure it against being lifted off
the mounting plates.
 Refit the lamps.
 Refit the grease filters.
Installation
31