Installation Recommendations; Protective Foil; Deflector - Miele DA 1050-55 Operating And Installation Instructions

Installation recommendations

– To achieve optimum vapour
extraction, the rangehood must cover
the cooktop. It should be positioned
centrally over the cooktop, not to the
side.
– The cooktop should be no wider than
the rangehood and, if possible, it
should be narrower, especially for
safety distances greater than 750
mm.
– The installation area must be easily
accessible. The rangehood should be
easily accessible and easy to
dismantle in the event that service is
required. This should be taken into
consideration when planning the
position of cupboards, shelves,
ceilings or features in the vicinity of
the rangehood.

Protective foil

The housing components of stainless
steel models have protective foil around
them to protect them from transport
damage.
 Please remove the grease filters from
the appliance and remove this foil
from the housing components and
the frames of the grease filters before
installing the rangehood. The foil can
be peeled off easily.

Deflector

A deflector is installed in the rear of the
rangehood. Its position depends on the
operating mode. With extraction the air
is directed upwards and out of the
housing at the back. With recirculation
the opening is closed and the air is
directed forwards through the
recirculation grille.
Installation
27