Table of Contents
Advertisement
6.3.6 User profiles
If more drivers use TravelPilotfor navigating, their settings can be remembered by using one
of the user profiles. Rename the profiles after tapping the edit button on the right so that all
users know which profile to use and switch between profiles by tapping its name. If you select
a new profile, the application restarts so that the new settings can take effect.
6.3.7 Map settings
You can fine-tune the appearance of the Map screen. Adjust the map view to your needs,
choose suitable colour themes from the list for both daytime and night use, change the blue
arrow to a 3D car model, show or hide 3D buildings, turn track logging on or off, and manage
you Place visibility sets (which Places to show on the map).
The map is always shown on the screen so that you can see the effect when you change a
setting.
Button
Switch the map view between a 3D perspective view and a 2D heading-
up view.
Switch the map view between a 3D perspective view, a 2D heading-up
view and a 2D north-up view.
Adjust the basic zoom and tilt levels to your needs. Three levels are
available.
When selected, the map zooms out to show an overview of the
surrounding area if the next route event (manoeuvre) is far. When you
get close to the event, the normal map view returns.
Switch between daytime and night colour modes or let the software
switch between the two modes automatically a few minutes before
sunrise and a few minutes after sunset.
Select the colour scheme used in daytime mode.
Select the colour scheme used in night mode.
Please NOTE that the map screen can
be di erent depending on the model
(for example, 3D buildings)
Description
98
Advertisement
Table of Contents
