Table of Contents
Advertisement
Vehicle types:
When creating a new vehicle profile, select one of the below vehicle types. Besides the below
mentioned conditions, dimension, weight and freight hazard restrictions can also be taken into
account when planning a route.
•
•
Manoeuvre restrictions and directional constraints are taken into account when
planning a route.
•
Roads are used only if access for cars is allowed.
•
Private roads and resident-only roads are used only they are inevitable to reach
the destination.
•
Walkways are excluded from routes.
•
•
Neither manoeuvre restrictions nor directional constraints are taken into account
when planning a route.
•
Roads are used only if access for pedestrians is allowed.
•
Controlled-access roads are excluded from routes.
•
A private road is used only if the destination is there.
•
Speed limits are not used in route calculation and an average walking speed is
used when calculating the estimated time of arrival.
•
•
All manoeuvres are available in intersections.
•
Directional constraints are taken into account the way that opposite direction is
allowed with a low speed.
•
A private road is used only if the destination is there.
•
Walkways are excluded from routes.
Set the height of the vehicle.
Set if there is a trailer attached to the vehicle.
Set the maximum allowed weight of the vehicle.
Set the actual weight of the vehicle.
Select one or more hazard types if the vehicle carries dangerous
material.
:
:
:
96
Advertisement
Table of Contents
