Table of Contents
Advertisement
5.3 Setting up driving time alerts
In order to obey the regulations regarding continuous and daily driving, you can set
countdown timers to alert you when you need a break or a sleep. This feature can be set for
one driver or two alternate drivers.
1.
If you are on the Map screen, tap
menu.
2.
In the Navigation menu, tap
3.
Tap
4.
Tap
5.
(optional) Tap the switch to use the vehicle with two drivers. The timer defaults are the
same but the timers will count down for each driver individually.
6.
When finished, tap and hold
Whenever the vehicle stops, the current driver receives a message a few minutes later
whether this stop means a break.
When a break is initiated, the continuous driving timer stops and it is reset to its default value,
the daily driving timer also stops, and the break timer starts counting down (the break starts
from the moment when the vehicle stopped). When the vehicle is in motion again, the break
timer is reset, and both driving timers start counting down again.
.
.
and set the driving timer defaults for the driver.
80
to return to the Navigation
to return to the Map screen.
Advertisement
Table of Contents
