6 Lead-Free Electrical Repair
This product is manufactured with lead-free solder and lead-free components. During
electrical repair, it is critical to make sure that no lead is introduced into the product. For
this reason, certain repair materials and equipment must be designated as lead-free and
labelled accordingly. A lead-free work area must be setup that is completely separated
from work areas that are used to make leaded repairs. The lead-free work area must
also be clearly labelled as shown in the figure below. Certain items must be designated
for lead-free work only. Some of the items that need to be clearly labelled in this way
are listed in the table below. Note that any item that contacts the solder must be labelled
and used for lead-free work only.
Soldering Tips
Solder
1206-4804 Rev1
©
Company Internal
Sony Ericsson Mobile Communications AB
Wicking Tape
Tip Tinner
Installation Instruction, Electrical
Tip Cleaner (steel wool)
Soldering Iron
14(16)