Eng0 – Display and Button Check
1.1T
a)
While in the Engineering Mode Menu, press Speed "+" or "- " until Eng0 appears in the display.
b)
Press "Start" to select Eng0.
c)
Press "Start" button to verify all LED's
2.1T, 3.1T
a)
While in the Engineering Mode Menu, press Speed "∧" or "∨ " until Eng0 appears in the display.
b)
Press "Start" to select Eng0.
c)
Press "Start" button to verify all LED's
4.1T, 5.1T
a)
While in the Engineering Mode menu, press Speed "∧" or "∨ " until Eng0 appears in the display.
b)
Press "Select" to select Eng0.
c)
Press "Start" button to verify all LED's
26