To Install And Connect The Additional Wiring Harnesses - BMW 65 90 0 151 635 Installation Instructions Manual

9. To install and connect the additional wiring harnesses

30
A1
30
18
18
Retrofit/Installation kit No. 65 90 0 151 635 (others see cover sheet)
Installation instructions No. 01 29 0 028 872
Disconnect the black 8-pin retrofit plug
connector X322.
Connect branch A1, black 8-pin plug casing on
X322
the power supply wiring harness A, to the black
8-pin socket casing (30) on the retrofit plug
connector X322.
Connect branch A2, black 8-pin socket casing,
to the black 8-pin plug casing (31) on the retrofit
31
plug connector X322.
A2
F 46 1172 B
Open the black 17-pin radio connection plug
X18126 and disconnect the 1-pin socket contact
(30) from slot PIN 4 and connect it to the
A3
enclosed black 1-pin socket casing (18).
Connect branch A3, 1-pin socket contact, black
cable, on the power supply wiring harness A, to
X18126 in PIN 4.
X18126
F 46 1173 B
Connect the black 1-pin plug casing on branch
A3, black cable, to the black 1-pin socket casing
(18) with the connected 1-pin socket contact
A3
from the black 17-pin radio connection plug
X18126.
Close the black 17-pin radio connection plug
X18126.
X18126
X18126 is not occupied in PIN 4, simply connect
the 1-pin socket contact from branch A3, black
cable, to slot PIN 4.
F 46 1174 B
Secure the new plug connection with cable ties.
If the black 17-pin radio connection plug
Issue date: 06.2002
EN/11