Title Assignment; More About This Unit - JVC KD-AR390 Instructions Manual

Title assignment

You can assign titles to 30 station frequencies (FM and
AM) using 8 characters (maximum) for each title.
• When HD Radio tuner box is connected, this feature
will be disable.
1
Select FM/AM.
2
Show the title entry screen.
3
Assign a title.
Select a character.
1
Move to the next (or previous) character
2
position.
Repeat steps and until you finish
3 1 2
entering the title.
4
Finish the procedure.
To erase the entire title
In step 2 above...
EN20-29_KD-AR390[J]f.indd 25

More about this unit

Basic operations
Turning on the power
• By pressing SRC or AUX button on the unit, you
can also turn on the power. If the source is ready,
playback also starts.
Turning off the power
• If you turn off the power while listening to a track,
playback will start from where it had been stopped
previously next time you turn on the power.
General
• If you change the source while listening to a disc,
playback stops.
Next time you select "CD" as the playback source,
playback will start from where it had been stopped
previously.
• After ejecting a disc, "NO DISC" appears and you
cannot operate some of the buttons. Insert another
disc or press SRC to select another playback source.
Tuner operations
Storing stations in memory
• During SSM search...
– All previously stored stations are erased and the
stations are stored anew.
– Received stations are preset in No. 1 (lowest
frequency) to No. 6 (highest frequency).
– When SSM is over, the station stored in No. 1 will
be automatically tuned in.
• When storing a station manually, the previously
preset station is erased when a new station is stored
in the same preset number.
Continued on the next page
SETTINGS & REFERENCE 25
9/24/07 4:36:34 PM