Bluetooth Settings - JVC KD-AR390 Instructions Manual

Bluetooth settings

You can change the settings listed on the right column
according to your preference.
1
Select "BT-PHONE" or "BT-AUDIO."
2
Enter the Bluetooth menu.
3
Select "SETTINGS."
4
Select a setting item.
*
Appears only when a Bluetooth phone is
1
connected.
* Appears only when a Bluetooth phone is
2
connected and it is compatible with text message
(notified through JVC Bluetooth adapter).
* Bluetooth Audio: Shows only "Version."
3
5
Change the setting accordingly.
24 SETTINGS
EN20-29_KD-AR390[J]f.indd 24
Setting menu (
: Initial)
AUTO CNNCT (connect)
When the unit is turned on, the connection is
established automatically with...
OFF: No Bluetooth device.
LAST: The last connected Bluetooth device.
ORDER: The available registered Bluetooth device
found at first.
AUTO ANSWER
Only for the device being connected for "BT-PHONE."
ON:
The unit answers the incoming calls
automatically.
OFF: The unit does not answer the calls
automatically. Answer the calls manually.
REJECT: The unit rejects all incoming calls.
MSG INFO (message info)
Only for the device being connected for "BT-PHONE."
AUTO: The unit informs you of the arrival of
a message by ringing and displaying
"RCV MESSAGE" (receiving message).
MANUAL: The unit does not inform you of the arrival of
a message.
MIC SET (microphone setting)
Only for the device being connected for "BT-PHONE."
Adjust microphone volume connected to the Bluetooth
adapter, [LEVEL 01/02/03].
VERSION
The Bluetooth software and hardware versions are
shown.
10/12/07 4:27:35 PM