Assembly - Ariens Sno-Thro ST20E Owner's/Operator's Manual

WARNING: AVOID INJURY. Read
and understand the entire Safety
section before proceeding.
WARNING: Dropping or tipping
over boxed unit could result in
personal injury or damage to unit.
PACKAGE CONTENTS
2
1
4
1. Discharge
Chute
2. Chute Crank
3. Sno-Thro
Unit
3
4. Literature
Pack with
Extra Shear
Bolts
Figure 3

ASSEMBLY

ASSEMBLY
Tools Required:
• Pliers
• Open-End Wrenches: 3/8, 7/16, 1/2,
9/16 in. and/or Adjustable Wrench
• Tire Gauge
Unfold Handlebar (Figure 4)
1. Remove the lower and loosen the upper
hardware on the handlebar assembly.
2. Rotate the handlebars into operating
position.
3. Install and tighten the hardware on the
handlebar assembly.
1. Lower
2. Hardware
OS7035
GB - 10
1
3. Upper
Handlebar
Figure 4
2
3
Handlebar