Auxiliary Inputs/Rear Camera Operation - Dual DV1014BH Installation & Owner's Manual

DV1014BH
Auxiliary Inputs - AV1 & AV2
Using AV1 Input
Using AV2 Input
Rear Camera Operation - (Optional)
Using Rear Camera
Auto Selection
27
OPERATION
Connect an optional audio/video source into the 3.5mm (front panel) input.
Select AV1 from the Main Menu to listen to audio.
Engage parking brake to watch video.
Adjust volume on the external audio source as needed (if connected to the
headphone output of the device).
Connect an optional audio/video source to the Auxiliary Input 2 (Red/White/Yellow
RCA connectors). Refer to page 6 for details.
Select AV2 from the Main Menu to listen to audio.
Engage parking brake to watch video.
Note: The external video output is not active when using the AV1/AV2 inputs or
when viewing video from an iPod device.
Connect an optional rear camera to the Camera Input (Black RCA connector).
Refer to page 6 for details.
The camera image can be reversed (if needed) in the Main Setup Menu.
page 12 for details.
Manual selection - Touch CAMERA icon from the Main Menu to select camera
mode. Touch the top left area on the screen to exit camera mode.
The unit will automatically select camera mode when connected to the reverse
lamp circuitry. Refer to page 6 for details.
Note: The external video output is not active when using the rear camera input.
Refer to