Ranger BN055 Instructions For Use Manual page 11

d
ate
1. Enter setup mode as described on page 9. The
LCD will flash "DATE".
2. Press OK.
3. The first two digits on the LCD represent the
month (MM) and last two digits represent day
(DD).
4. Press UP or DOWN to select month between 01-
12 and press OK to confirm.
5. Press UP or DOWN to select day between 01-31
and press OK to confirm.
6. Press UP or DOWN to select year between 00-99
(2000-2099) and press OK to confirm.
7. Press SETUP to save and exit.
t
IMe
1. Enter setup mode as described on page 9. The
LCD will flash "DATE".
2. Press UP or DOWN until #2 "TIME" is blinking
and press OK.
3. The first two digits on the LCD represent hours
(HH) and last two digits represent minutes (MM).
4. Press UP or DOWN to select the hour between
01-24 and press OK to confirm.
5. Press UP or DOWN to select minutes between
01-60 and press OK to confirm.
6. Press SETUP to save and exit.
▲ In order to conserve battery power during
storage the date and time will reset to zero if
the unit is switched off for more than an hour.
- 11 -