Pair Devices - Nokia 702 User Manual

When the connection has been established, the note
Sending data is shown.
The Sent folder in Messaging
using a Bluetooth connection.
Icons for different devices:
Computer
Phone
Audio or video
Headset
Other
Checking the status of the Bluetooth connection
• When is shown in the standby mode, a Bluetooth
connection is active.
• When is blinking, the device is trying to connect
to the other device.
• When is shown continuously, the Bluetooth
connection is active.

Pair devices

Tip: To define a short name (nickname or
alias), scroll to the device and select
> Assign short name
view. This name helps you to recognise a
certain device during device search or when a
device requests a connection.
does not store messages sent
Options
in the paired devices
Paired devices are easier to recognise; they are indicated
by in the device search. In the
press to open the paired devices view (
To pair with a device, select
The device starts a device search. Select the device.
Exchange passcodes. See step 4 in "Send data using a
Bluetooth connection" on page 96.
To cancel a pairing, scroll to the device, and select
> Delete. If you want to cancel all pairings, select
> Delete all.
Tip: If you are currently connected to a device
and delete the pairing with that device, pairing
is removed immediately, but the connection
remains active.
To set a device to be authorised or unauthorised, scroll to
a device, and select from the following options:
Set as authorised—Connections between the device and
this device can be made without your knowledge. No
separate acceptance or authorisation is needed. Use this
status for your own devices, such as your compatible
headset or PC, or devices that belong to someone you
trust. means devices that the auto-connection is set.
Set as unauthorised—Connection requests from this
device must be accepted separately every time.
Bluetooth main view,
).
Options > New paired device.
Options
Options
97