Nokia 702 User Manual page 110

Note: The following functions cannot
currently be used.
•Fixed dialling
•Closed user group
•Confirm SIM services
Fixed dialling—You can restrict calls and text messages
from the device to selected phone numbers, if supported
by your SIM card. You need the PIN2 code for this
function. To view the list of fixed dialling numbers, press
, and select Tools > Settings > Security > Phone and
SIM > Fixed dialling. To add new numbers to the fixed
dialling list, select
Contacts. When you use
connections are not possible, except when sending text
messages over a packet data connection. In this case, the
message centre number and the recipient's phone number
must be included on the fixed dialling list.
Options in the
Activ. fixed dialling/Deact. fixed
Edit, Delete,
Find, Mark/Unmark, Help, and Exit.
110
Options > New contact
Fixed dialling, packet data
Fixed dialling view are Open, Call,
dialling, New
Add to Contacts, Add from
Closed user group
group of people to whom you can call and who can call
or Add from
you.
Confirm SIM services
phone to display confirmation messages when you are
using a SIM card service.
Glossary of PIN and lock codes
Personal identification number (PIN) code—This code
contact,
protects your SIM card against unauthorised use. The PIN
Contacts,
code (4—8 digits) is usually supplied with the SIM card.
After three consecutive incorrect PIN code entries, the PIN
code is blocked, and you need to unblock it before you can
use the SIM card again. See the information about the PUK
code in this section.
Note: When security features that restrict calls
are in use (such as Call barring, Closed user
group, and Fixed dialling) calls still may be
possible to the official emergency numbers
programmed into the device. In this situation,
calls to 110, 118 and 119 may not be possible
depending on your USIM card. In that case,
please set this option off and make calls with
these numbers in accordance with "Emergency
calls" on page 148.
(network service)—You can specify a
(network service)—You can set the