Miele TX3587 Operating And Installation Instructions page 92

Problem solving guide
Problem
The door cannot be
opened at the end of a
Pyrolytic cleaning
programme.
There is soiling in the
oven after the Pyrolytic
cleaning programme.
F 32 appears in the
display.
F 33 appears in the
display.
F xx appears in the
display.
92
Possible cause and remedy
The door lock for the Pyrolytic cleaning programme is
not being released.
^ Turn the function selector to the 0 position.
If this does not release the door lock, please call
Miele.
The Pyrolytic cleaning programme burns off soiling in
the oven and leaves it as ash.
^ Remove the ash using a damp microfibre cloth or with
a clean sponge and a solution of hot water and
washing-up liquid.
^ If there is still coarse soiling left in the oven after the
Pyrolytic cleaning programme, you should start the
programme again, selecting a longer duration.
The Pyrolytic cleaning programme door lock is not
locking.
^ Turn the function selector to the 0 position and select
a Pyrolytic cleaning programme again.
If the fault code appears again, call Miele.
The door lock for the Pyrolytic cleaning programme is
not being released.
^ Turn the function selector to the 0 position.
If the door lock still does not release, call Miele.
There is a problem that you cannot resolve.
^ Call Miele.