Miele TX3587 Operating And Installation Instructions page 89

Problem
i2:00 is flashing in the
display.
PY is lit up or flashing in
the display.
0:00 appears
unexpectedly in the
display and T is
flashing at the same
time. The buzzer might
also be sounding.
A noise can be heard
after a cooking process.
Possible cause and remedy
There has been a power cut.
^ Reset the time of day (see "Using for the first time").
Cooking durations will also need to be reset for any
programme in use.
There has been a power cut which has caused the
Pyrolytic cleaning programme to stop.
The 0 symbol will remain lit up and the door locked
until the temperature inside the oven drops to below
280 °C.
^ Turn the function selector to 0.
The clock display will start to flash.
^ Reset the time of day (see "Using for the first time").
The oven has been operating for an unusually long time
and this has activated the safety switch-off function.
^ Turn the function selector to 0. The oven is now ready
to use again immediately.
The cooling fan is switched on.
The fan will switch off automatically after a certain time.
Problem solving guide
89