Line Settings - Nokia DNT2Mi-fp User Manual

6.3

Line settings

DN0445814
Issue 2-0 en
DNT2Mi-fp can also be used as a network timing source using the unit's Internal
timing circuits.
DNT2Mi-fp can also be used as Transparent timing. This means that both E1
transmission directions are independent.
You have to check the following items:
Line interface (Q1: 6,3,3)
The line interface settings determine line SHDSL mode, connection rate and use
of wires.
Typically, DNT2Mi-fp is configured as STU-R, Rate Adaptive. The Rate
Adaptive mode automatically adapts the requested fixed line rate to STU-C.
STU-C Fixed
2-wire
Line Rate
n=3...32
Figure 16. Principle of the line interface menu
Power backoff (Q1: 6,3,6)
Select this option to enable or disable transmit power reduction on short loops.
© Nokia Corporation
Nokia Proprietary and Confidential
Line interface
SHDSL mode
4-wire 2-wire
Line Rate
n=6...32
Commissioning
STU-R Rate Adaptive
4-wire
29 (60)