JVC DLA-HD950 Instructions Manual page 37

Input Signal > Aspect (Video)
Aspect (Video)
16
Configures the screen size of the projected image.
4:3
16:9
Zoom
●
This setting can also be configured from the remote control. (
●
The items cannot be set in the case of PC signals.
Input Signal > Aspect (Computer)
Aspect (Computer)
17
Configures the screen size of the projected image.
Auto
1:1
Full
●
This setting can also be configured from the remote control. (
●
This setting cannot be set in the case of SD or HD signals.
Input Signal > V-Stretch (when HD or SD video signals are input)
V-Stretch
18
When set to "On", the projected 2.35:1 image will be stretched vertically to the panel resolution.
On
Off
●
This setting cannot be set in the case of PC signals.
Input Signal > Over Scan
Over Scan
19
Selects whether or not to set over scan for the SD video signal.
On
Off
●
This setting is not available when HD signal or PC signal is input.
Downloaded From projector-manual.com JVC Manuals
Sets the screen size of the projected image as 4:3.
Sets the screen size of the projected image as 16:9.
Zooms the images. (This item cannot be selected in the case of HD signals.)
Enlarges the PC signal horizontally/vertically until it fits the panel height, and displays
it in the original aspect ratio.
Displays the PC signal corresponding to the panel at one dot per pixel ratio. The PC
screen can be shown in the original size.
Enlarges the PC signal horizontally/vertically.
The projected 2.35:1 image will be stretched vertically to the panel resolution.
Projects the 2.35:1 image as-is. (Black bands will be displayed on the top and bottom.)
"Off"
Over scan the top, left, bottom and right at 2.5% each.
Do not over scan.
P14)
P14)
"On"
ENGLISH
37