JVC DLA-HD950 Instructions Manual page 29

Installation
Lens Control
22
Pixel Adjust
23
Installation Style
24
Keystone
25
Screen Adjust
26
Display Setup
Back Color
27
Menu Position
28
Menu Display
29
Line Display
30
Source Display
31
Logo
32
Language
33
Function
Lamp Power
34
Trigger
35
Test Pattern
36
Off Timer
37
High Altitude
38
Mode
Information
Input Image Connector, Input Source Name, PC resolution, PC H Frequency, PC V Frequency, Deep Color Depth, and
Lamp Use are displayed.
Downloaded From projector-manual.com JVC Manuals
Controls the individual motorized function of the lens when setting up the projector.
Setting: Focus, Zoom, shift, Image pattern, Lock
Makes fine adjustments of 1 pixel unit for each minor color shift in the horizontal/vertical direction
of the image.
Setting: horizontal and vertical
Flips the image to the left or right, up or down according to the projection state of the projector.
Setting: Front, Ceiling Mount (F), Rear Ceiling Mount (R)
Compensates for trapezoidal distortion caused by installation.
Corrects skewed white balance derived from the reflective characteristics of the screen.
Setting: Off, A, B, C
Configures the screen color displayed when there is no input signal.
Setting: Blue, Black
Sets the display position of the menu. The possible positions for displaying the menu are at the
four corners or at center of the screen.
Sets the duration for displaying the menu.
Setting: 15sec, On
Sets whether to display the input setting when switching the input.
Setting: 5 sec, Off
Sets whether to display the source of input signals when changing the input.
Setting: On, Off
Sets whether to display "Logo" during startup.
Setting: On, Off
Sets the language of the menu display (12 languages).
Configures the output of the light-source lamp.
Setting: Normal, High
Configures the output of Trigger terminal.
Setting: Off, On(Power), On(V-Stretch)
Display 6 types of test patterns.
Automatically powers off when there is no operation for a certain duration.
Setting: 1 hour, 2 hours, 3 hours, 4 hours
Selects this when using the projector in a location of low atmospheric pressure (higher than 900
meters above sea level).
Setting: On, Off
ENGLISH
29