Sanyo PLC-XTC50AL Service Manual page 36

Optical Parts Disassembly
1-2. LCD Panel/Prism Assy disassembly
1. Remove 1 screw-A (Mx4) each on the stopper and remove the stopper-B
and C, and pull the Polarized Glass-Out and Pre-Polarized Glass upward.
Stopper-B
(Blue)
Pre-Polarized glass (B)
Polarized glass-out (B)
Mounting direction
Mount the pre-polarized glasses and polarized glasses as shown in the figure below.
Lcd panel/Prism top view
R-LCD panel
Green Marker
A
Film side
Prism
G-LCD panel
-36-
A
Stopper-B
(Green)
Pre-Polarized glass (G)
Polarized glass-out (G)
A
Stopper-C
(red)
Film side
B-LCD panel
Film side
Green Marker
Polarized glass-out (R)
Blue Marker
Blue Marker